1 / 5
a machine that is sitting inside of a buildingtwo machines that are sitting in a warehousean image of a machine in a factory with a lot of machinerya picture of a sign on the side of a machinea person holding a label with a price tag on it
METAYER-MERMOZ Maison de Ventes aux Enchères NEVERS

34 - C 3086 STREAM SB2 10.5 BIESSE dual-function moulding and ven…
See original version (French)

Sale commission
Description
C 3086 STREAM SB2 10.5 BIESSE dual-function moulding and veneering machine Panel width: 240 mm to 1200 mm Panel length: 240 mm to 3000 mm Panel thickness: 10 mm to 60 mm Edge thickness: 0.3 mm to 3 mm Centre-to-centre distance between stops: 500 mm INPUT / OUTPUT: Transfer via special chains with wear- and stain-resistant rubber-coated links Pivoting inlet guides, adjustable to suit the panel overhang Alignment device to ensure the panel rests against the cleats on the upper presser Inlet buffer device optimising the feeding of panels of different widths Longitudinal frames constructed as a single, highly rigid monolithic structure FEED CHAIN: The speed is continuously adjustable from 10 to 40 m/min via an inverter, controlled directly by the CNC The panel stop blocks are automatically height-adjustable via the NC and can assume the following positions: protruding 12–18–23 mm from the feed line plane BELT PRESS SOUND-PROOF ENCLOSURES All units fitted with rotating tools are housed within enclosures lined with sound-absorbing material Internal lighting CNC control unit located at the machine’s inlet on the frame side MILLING UNIT With a pneumatic timing mechanism used as a splinter guard for cross-cutting Tool rotation speed: 6,000 rpm Motor power: 5.8 kW Tool diameter: 200 mm DOUBLE STACKED SHREDDERS With simultaneous movement for adjusting panel overhang and independent horizontal and vertical adjustment Load-bearing structure made of cast iron Tool rotation speed: 6,000 rpm Motor power: 5.8 and 5.8 kW Tool diameter: 205 to 250 mm NUMERICAL CONTROL Video interface Positioning axis control Chain feed speed adjustment Presser height adjustment according to thickness Edge changer management Profiling list management Automatic edge magazine management Cascaded motor start-up Option to connect to a barcode reader NC410 module 12" monitor MACHINE EXTENSION TO 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device supports workpieces which, due to their dimensions and thickness, may bend in the centre. Fully automatic lifting/activation CHAIN CLAMPS AT 500 mm 10.5 SP3 GLUE APPLICATOR UNIT Straight edging in melamine-faced resin, ABS, PVC, PP EVA-based thermoplastic adhesives Independent, interchangeable Teflon-coated tank Sensor for monitoring the glue level inside the tank Rotation speed of the glue coating roller electronically synchronised with the chain feed speed Patented pre-melting device Granule container (8 kg) Edge presence detection device Option for automatic edge replacement Edge length 280 mm 6 POSITIONS FOR MOBILE EDGE MAGAZINE END TRIMMING End trimming unit for edge thicknesses up to 3 mm Device for rapid retraction during operation Automatic disengagement of the unit when motors are stopped Speed: 12,000 rpm Panel overhang: 35 mm Edge thickness: 0.3 to 3 mm Panel thickness: 10 to 60 mm Distance between two consecutive panels: 350 mm HEAVY-DUTY TRIMMING UNIT 2 superimposed motors with horizontal spindles Automatic pneumatic disengagement of the unit Speed: 12,000 rpm Motor power: 1.3 + 1.3 kW Panel thickness: 10 to 60 mm Tool diameter: 80 mm CORNER TRIMMING UNIT The tool position relative to the material is adjusted automatically to predefined dimensions using 4 pre-adjustable in-line stops The in-line stops are selected automatically by the control system Used on the MULTIPROFIL tool unit to change profiles/templates without replacing the tool The tools are fitted with a 20° chamfer and a radius of 1.5–2–3 mm Speed: 12,000 rpm Motor power: 0.65 + 0.65 kW Panel thickness: 10 to 60 mm UPPER/LOWER ROUNDING UNIT Rounding copier for the top and bottom stops of the panel, with oscillating movement to follow the panel Quick-release system for motor-mounted units Automatic tool disengagement when motors are stopped Tool rotation speed: 12,000 rpm Motor power: 0.3 kW Edge thickness: 0.3 to 3 mm Radius with concave profile: 40 mm Minimum distance between the tail end of one panel and the head of the next (at 20 m/min): 500 mm UNIVERSAL MILLING MACHINE For cutting profiles, grooves and rebates on the edge and face of panels using pneumatic operation Motor tiltable manually from 0 to 90° Automatic unit disengagement from the control panel Speed: 12,000 rpm Motor power: 5 kW Tool diameter: 125 mm DOUBLE UNIVERSAL MILLING MACHINE For cutting grooves and rebates on the edges and faces of panels using pneumatic operation The upper motor can be manually tilted from 0 to 90° The lower motor is fixed in a horizontal position Automatic deactivation of units via the control panel Speed: 12,000 rpm Motor power: 5+5 kW Tool diameter: 125 mm EDGE SCRAPER UNIT For finishing thick ABS/PVC/PP edges using radiused tools and horizontal and vertical copiers Fitted with a spray nozzle for cleaning the tool Automatic deactivation via the control panel Tool radius: 1 to 5 mm EDGE HEATER Used to heat the panel’s edge as it passes through, to restore its original colour when using PVC materials GLUE SCRAPER UNIT EDGE-CONTROL DEVICE Electromechanical device for controlling edge length using a shear operating at 40 m/min Minimum length of edge to be applied: 350 mm SB BAR FOR NARROW PARTS Minimum panel width: 35 mm KIT FOR NARROW PARTS WITH THIN EDGES This allows workpieces with a minimum width of 70 mm to be processed, provided that thin edging is used Minimum panel length: 400 mm PREPARATION FOR INSTALLATION OF PU GLUE KIT https://kazi-tani.com/fr/toutes-nos-machines/item/882-faconneuse-plaqueuse-double-biesse-stream-sb2-10-5-c3086
See original version (French)
Auto-translation. Refer to original language for legal validity.
About the sale LJ CONTINUED: INDUSTRIAL EQUIPMENT AND WOODWORKING MACHINERY
Auction location
Auction time 09/22/2026 at 9:00 AM
Pictures credits: Contact the Auction House
You may also like